Certis




Quality Control Manager
California
Engineering
Quality Control Manager
Heavy Civil;Government;Airport/Terminal;USACE
JN -052020-183

Certis Solutions is looking for a Quality Control (QC) Manager with Ten (10) or more years of relevant construction experience At least five (5) of the required ten (10) years must be specifically in airfield paving projects with complex scope. The individual will provide the knowledge, skills, and experience to define, inspect, and document the daily work associated with ongoing construction projects to ensure that the work is being constructed in accordance with the established minimum standards and scope of work for the project. The QC Manager’s role is to provide overall management of Construction Quality Control (CQC) and have the authority to act in all CQC matters. The QC Manager must support the Corporate QC Program Manager, Project Manager, and others who are focused on the broader aspects of the project by providing focused effort on Quality of the physical work.


Essential Duties and Responsibilities

  • Work closely with the Project Manager, Superintendent, and other project personnel to be a resource that readily understands the quality requirements for each definable feature of work.
  • Effectively communicate the standards of care required for each definable feature of work to the various team members in the project through the use of preparatory, initial, follow-up, and other less formal meetings.
  • Work in coordination with others on the project team including project management, construction, engineering, and architectural design to ensure all drawings and submittals are in conformance with project specifications and change directives.
  • Chair and document weekly site QC meetings and provide written minutes as described in project specific contract documents.
  • Provide written daily QC reports that document all work performed with inspections to ensure work is being performed in conformed in compliance with project specifications.
  • Must actively monitor and verify QC conformance and constructively confront non-conformance issues to produce the desired outcome in a timely manner.
  • Create, update, and maintain the project specific quality control reports.
  • Verify that checklists are being used and signed off prior to the placement of concrete, steel, and other similar items of work.
  • Verify and document that all materials received for the project are in conformance with the approved submittal, are handled and stored appropriately, and are acceptable for use in the project.
  • Schedule, document the results of, and maintain a log of all code and independent inspections that are required.
  • Clearly document, correct, and re-inspect all non-conformances prior to acceptance of re-work items.
  • Conduct daily inspections and periodically document the inspection process via follow up reports for specific definable features of work to verify that work is proceeding with the contract documents and the approved submittals. (Desired results come from what is inspected, not what is expected.)
  • Coordinate and document the testing and commissioning of building systems.
  • Document and distribute pre-punch lists, punch lists, and the completion of these actions on these lists.
  • Document final inspections, certificates of occupancy and acceptance of the work and various phases thereof.
  • Maintain the project “as-built” drawings on a daily basis.
  • Stop work, if necessary, to resolve matters that affect safety, quality, and/or inhibit the logical progress of work.
  • Participate in regularly held meetings involving project staff and external stake holders, such as Owners, Subcontractors, etc.
  • Participate in industry networking functions and encourage staff to seek out life-long learning opportunities and professional development.
  • Other duties as assigned.

 

Supervision

None


Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum Qualifications

  • Bachelor of Science degree in engineering, architecture, science or construction management
    • Experience can be substituted for education on a 1:1 basis
  •  Ten (10) or more years of relevant construction experience
    • At least five (5) of the required ten (10) years must be specifically in airfield paving projects with complex scope
  • Current USACE CQM Certificate.
  • Ability to communicate in English both in written and spoken word.

·       Proficiency in Microsoft Office software (Outlook, Word, Excel)

  • Demonstrated understanding of construction means and methods associated with government, commercial and institutional buildings, mechanical systems, and site work related thereto.
  • A working knowledge of civil, architectural, mechanical, and electrical work.
  • High level of proficiency with spreadsheets, schedules, email, and other software used in the construction industry.
  • Current safety credentials to include OSHA 30, 1st Aid, and CPR.


Preferred Qualifications

·       Professional licensure in a related discipline.


Shareholder Preference

Pursuant to PL 93-638, as amended, preference will be given to qualified Ahtna Native Corporation Shareholders, Descendants, and Spouses in all phases of employment.

 

Physical Demands

·       Frequent lifting, sitting, standing, stooping for prolonged periods of time, using hands/fingers requiring dexterity, should have good hand-eye coordination and motion control in coordination with handling tools, equipment, and other related components. 

·       Reaching with hands and arms for items above and below sight level, talking, hearing, and seeing (up close, at a distance, along the periphery, with depth, color perception, and the ability to adjust focus); walking from place to place within the project location with occasional use of stairs and no elevator available; bending, pushing, pulling, and standing for up to 8 hours.

·       Frequent lifting of up to 50 pounds such as small electrical components, equipment and other materials. 

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 


Work Environment

  • Indoors and outdoors, may be subject to changes in temperature and noise levels.



Essential Duties and Responsibilities

  • Work closely with the Project Manager, Superintendent, and other project personnel to be a resource that readily understands the quality requirements for each definable feature of work.
  • Effectively communicate the standards of care required for each definable feature of work to the various team members in the project through the use of preparatory, initial, follow-up, and other less formal meetings.
  • Work in coordination with others on the project team including project management, construction, engineering, and architectural design to ensure all drawings and submittals are in conformance with project specifications and change directives.
  • Chair and document weekly site QC meetings and provide written minutes as described in project specific contract documents.
  • Provide written daily QC reports that document all work performed with inspections to ensure work is being performed in conformed in compliance with project specifications.
  • Must actively monitor and verify QC conformance and constructively confront non-conformance issues to produce the desired outcome in a timely manner.
  • Create, update, and maintain the project specific quality control reports.
  • Verify that checklists are being used and signed off prior to the placement of concrete, steel, and other similar items of work.
  • Verify and document that all materials received for the project are in conformance with the approved submittal, are handled and stored appropriately, and are acceptable for use in the project.
  • Schedule, document the results of, and maintain a log of all code and independent inspections that are required.
  • Clearly document, correct, and re-inspect all non-conformances prior to acceptance of re-work items.
  • Conduct daily inspections and periodically document the inspection process via follow up reports for specific definable features of work to verify that work is proceeding with the contract documents and the approved submittals. (Desired results come from what is inspected, not what is expected.)
  • Coordinate and document the testing and commissioning of building systems.
  • Document and distribute pre-punch lists, punch lists, and the completion of these actions on these lists.
  • Document final inspections, certificates of occupancy and acceptance of the work and various phases thereof.
  • Maintain the project “as-built” drawings on a daily basis.
  • Stop work, if necessary, to resolve matters that affect safety, quality, and/or inhibit the logical progress of work.
  • Participate in regularly held meetings involving project staff and external stake holders, such as Owners, Subcontractors, etc.
  • Participate in industry networking functions and encourage staff to seek out life-long learning opportunities and professional development.
  • Other duties as assigned.



Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Minimum Qualifications

  • Bachelor of Science degree in engineering, architecture, science or construction management
    • Experience can be substituted for education on a 1:1 basis
  •  Ten (10) or more years of relevant construction experience
    • At least five (5) of the required ten (10) years must be specifically in airfield paving projects with complex scope
  • Current USACE CQM Certificate.
  • Ability to communicate in English both in written and spoken word.

·       Proficiency in Microsoft Office software (Outlook, Word, Excel)

  • Demonstrated understanding of construction means and methods associated with government, commercial and institutional buildings, mechanical systems, and site work related thereto.
  • A working knowledge of civil, architectural, mechanical, and electrical work.
  • High level of proficiency with spreadsheets, schedules, email, and other software used in the construction industry.
  • Current safety credentials to include OSHA 30, 1st Aid, and CPR.



  • Bachelor of Science degree in engineering, architecture, science or construction management
    • Experience can be substituted for education on a 1:1 basis